Features
Pillars
Standard Davit pillar manufactured
in 89mm (3.5")
diameter mild steel as a two piece
2m (6' 6") high construction. Angled jib pillar manufactured
in 89mm (3.5") diameter
mild steel as a single piece
850mm (2' 9.5") high construction.
All pillars incorporate
jib mounting lugs with oilite bearings and are finished
in
yellow gloss paint with lightly greased mounting spigots.
Jibs
Standard davit jib gives
an operating radius of 1m (3' 3"). Other reaches
are available.
Integral 'U' bracket for suspending tube mounted hoist
and chain claw bracket fitted as standard.
Angled davit jib is angled to give a ground level to lifting
hook height of 2m (6' 6") and an operating radius
of 1m (3' 3"). Integral mounting
bracket for spigot mounted open drum hoist and cable pulley
fitted as standard. Mounting diameters compatible only
with the lugs on appropriate pillars. Jibs are finished
in yellow
gloss paint.
Sockets and Brackets
Flush sockets, Floor sockets and
wall mounted sockets are available
to suit.
Wall mounted brackets can be supplied to accommodate a
jib
without a pillar.
All sockets are manganese phosphated and oil sealed to
protect against corrosion. |
